Hello again my dear
friends and DIY enthuses. Today I am going to share with you how to make Book
shelf for the kid’s room.
We need the following:
Wooden
boards x 2 / 1,20 x 2,40
1 Box of wood screws
White plugs screw heads
Metal brackets for the shelves
Banding strip
I
am highly recommending you get the boards cut in the shop if possible on a
width of 0,20 sm. When it comes to the positioning of the shelves use your
imagination and position in the way you feel comfortable.
Again
I would recommend you take the measurement of the wall and draw a draft of how
the book shelves should look like when complete. I have always done it this way
and I am quite happy with this practice and outcome.
When
you buying a flat pack furniture you will find out in the instructions that you
are to put together few different parts. In our case this will be done in a
different way. We will start the assembly from left to right in as you will be
positioning the shelves in chess type configuration. Please see the picture
below.
On
the two sides of the boards you will be drilling in for the holes in which you
stick the metal holders where you lay down the shelves. When you finish with
the first roll you need to add the second long board and start again.
You
can use the screws for fortification of the whole assembly. Use the white plugs
so you can cover the screw heads. Next step is to use the banding and cover the
cut side of the board. You can use an iron for the banding.
So
this is it. It is not that difficult and you can have book shelve for the kid’s
room in couple of hours. Again use your imagination for positioning of the
shelves.
In
my next post I will show you how to make a study desktop with hidden light
underneath of it.
Good
luck.
No comments:
Post a Comment